Filter
Top Products
14
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Press the reset button (page 10) with a pointed
object, such as a ballpoint pen.
Note
Pressing the reset button will erase the clock setting
and some stored contents.
Performing initial settings
After resetting, the display for the initial settings
appears. (The following illustration is for East
Asia models.)
1 Touch “Subwoofer” to set the
subwoofer connection status.
Set to “ON” if a subwoofer is connected, or
“OFF” if not.
2 Touch “Listening Position” to set the
listening position.
Set to “Front L” if your listening position is
front left, or “Front R” if front right.
3 Touch “Name Character”/“Language”
to set the character encoding/display
language.
Touch repeatedly until the desired character
encoding/display language appears.
For East Asia models, select the character
encoding.
For Middle East models, select the display
language.
4 Touch “OK.”
The setting is complete.
This setting can then be further configured in the
setting menu.
• For details on setting the subwoofer connection
status, see page 41.
• For details on setting the listening position, see
“Optimizing sound for the listening position —
Intelligent Time Alignment” on page 33.
• For details on setting the character encoding,
see page 38.
• For details on setting the display language, see
page 38.
Note
For East Asia models, some characters may not be
displayed correctly, depending on the language/
country/region.
Preparing the remote
commander
Before using the remote commander for the first
time, remove the insulation film.
Initial Setting
Subwoofer
Listening Position
Name Character
OFF /
ON
Front L
/ Front R
OK
Chinese
Car audio and car goods internet store Winauto
winauto.ua