Sony XR-CA600 Car Stereo System User Manual


 
19
Selecting the sound position
My Best sound Position (MBP)
When you drive without passengers, you can
enjoy the most comfortable sound environment
with My Best sound Position.
My Best sound Position has two presets, which
adjust the sound level of balance and fader. You
can select one very easily with the MBP button.
Press (MBP) repeatedly for the desired
listening position.
The mode of My Best sound Position is
shown in the display in order of the table.
After one second, the display goes back to the
normal playback mode.
If you want to adjust the sound level of
balance and fader more precisely, you can do
it using the (SOUND) button (see Adjusting
the sound characteristics on page 17).
Notes
When the BAL (balance) or FAD (fader) in Adjusting
the sound characteristics (page 17) is adjusted, the
MBP setting returns to OFF.
When MBP is set to OFF, the BAL and FAD setting is
activated.
Setting the equalizer
You can select an equalizer curve for seven
music types (XPLOD, VOCAL, CLUB, JAZZ,
NEW AGE, ROCK, CUSTOM, and OFF
(equalizer OFF)).
You can store and adjust the equalizer settings
for frequency and level.
Selecting the equalizer curve
1 Press (SOURCE) to select a source
(radio, CD, MD, or tape).
2 Press (EQ7) repeatedly until the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select OFF.
After 3 seconds, the display returns to the
normal playback mode.
Adjusting the equalizer curve
1 Press (MENU).
2 Press either side of (DISC/PRESET) or
(PRESET) repeatedly until EQ7
TUNE appears, then press (ENTER).
3 Press either side of (SEEK) to select
the desired equalizer curve, then
press (ENTER).
Each time you press (SEEK), the item
changes.
Display
window
Balance Level Fader Level
Right Left Front Rear
MBP-A
4dB 0 0 4dB
MBP-B 0 4dB 0 4dB
MBP-OFF
0000
continue to next page t