Sony XR-CA600 Car Stereo System User Manual


 
9
Cassette Player
Listening to a tape
1 Press (OPEN) and insert a cassette.
Playback starts automatically.
2 Close the front panel.
If a cassette is already inserted, press (SOURCE)
repeatedly until FORWARD or REVERSE
appears to start playback.
FORWARD: The side facing up is played.
REVERSE: The side facing down is played.
Note
The AMS function may not work when:
the blanks between tracks are shorter than 4
seconds.
there is noise between tracks.
there are long sections of low volume or quiet
sections.
Playing a tape in various
modes
You can play the tape in various modes:
METAL lets you play a metal or CrO
2 tape.
BL.SKP (Blank Skip) skips blanks longer than
8 seconds.
ATA (Automatic Tuner Activation) turns on the
tuner automatically when fast-winding the tape.
1 During tape playback, press (MENU).
2 Press either side of (DISC/PRESET) or
(PRESET) repeatedly until the desired
mode appears.
3 Press (+) side of (SEEK) to select
ON.
Example: ATA mode
Play mode starts.
4 Press (ENTER).
To return to normal playback mode, select
OFF in step 3.
Playing tracks repeatedly
— Repeat Play
During playback, press (3) (REP)
repeatedly until REP-ON in the
display appears.
To return to normal playback mode, select REP-
OFF.
Tip
During repeat playback, press (MODE). REP
disappears from the display and repeat mode is
cancelled.
To Press
Change the tapes
playback direction
(MODE) (o)
Stop playback (OFF)
Eject the cassette (OPEN) then Z
Skip tracks
Automatic
Music Sensor
(SEEK) (./>)
[once for each track]
Fast-forward/
reverse
Manual Search
(SEEK) (m/M)
[hold to desired point]