Sony XRS-300 Car Stereo System User Manual


 
8
When an FM stereo program
with a sufficient signal
strength is tuned in
1
Turn clockwise to turn the power on.
The “ST” indication appears.
To play back a cassette during
radio reception
Insert a cassette. The radio will be
turned off and playback will start
automatically.
Searching for the Stations
Automatically — Automatic Tuning
2
Press to select the desired band, FM1, FM2, or AM.
Tuning in a Station
FM/AM
FM1
ST
BALANCE
EJECT
BASSDSPL
VOLUME
FM/AM
POWER OFF
123
456
DIR
HI-FILTERSEEK
/MANU
PUSH
MANU
2
1
3
Preset Number Button
3
Press the PUSH SEEK button.
Stations will be scanned automatically and scanning will
stop when a station is tuned in. Repeat pressing the PUSH
SEEK button until the desired station is tuned in.
SEEK
/MANU
PUSH
Tuning in by Adjusting the Frequency
Manual Tuning
1 Press to select the desired band. FM1, FM2, or AM.
2 Press the PUSH MANU button for more than two seconds;
the sound will mute. When it comes on again (manual mode
is entered).
3 Press the preset number button 1 or 3, and adjust the
frequency.
If you dont adjust within two seconds, the manual mode will be
canceld.
PREVENTING ACCIDENTS!
While you are driving, the use of Automatic Tuning and the
Memory Preset Tuning is recommended instead of the Manual
Tuning.
13
MANU
For lower
frequencies
For higher
frequencies