Filter
Top Products
9
Radio Reception
Only one station per band
(FM1, FM2, and AM) can be
stored in the memory on each
preset number button.
If you try to store another station
on the same preset number
button, the previously stored
station will be erased.
When the “MEM” indication
comes on, the station is stored in
the memory and the operation is
completed. The “MEM”
indication goes off after a while.
Tune in a desired station.
Using automatic or manual tuning (page 8).
Memorizing Only the Desired Stations
For example, store a station on the preset number button 1.
1
Using the Memory Preset Tuning
Keep the preset number button pressed for about two
seconds until the “MEM” indication comes on in the
display window.
2
Up to 6 stations on each
band (FM1, FM2, and AM)
can be stored on the preset
number buttons in order of
your choice.
FM1
MEM
Repeat the same procedure to store other stations.
1
Receiving the Memorized Stations
Select the desired band. Press the desired preset number
button lightly.
16
BALANCE
EJECT
BASSDSPL
VOLUME
FM/AM
POWER OFF
123
456
DIR
HI-FILTERSEEK
/MANU
PUSH
MANU
2
Note
If you keep pressing the preset
number button for more than two
seconds, the currently received
station will be memorized again.
To receive the previously
memorized station, make sure
that the preset number button is
pressed only lightly.