Filter
Top Products
15
Radio operations
Band selection
Press the BAND/LOUD button repeatedly to select your desired radio band during RADIO mode:
FM1, FM2, FM3, MW1.
Automatic memory storing
Press AMS button for 2 seconds, the radio searches from current frequency and checks the signal
strength until one cycle is finished. And then 6 strongest stations are stored into the corresponding
preset number button.
Selecting station
Press preset 1-6 button to select the station, which had been stored in the memory.
Press the PREV/NEXT button for 2 seconds until “MANUAL” appears on the display, and then press
the PREV/NEXT button to select a station. If both buttons have not been pressed for several
seconds, they will return to automatic seek mode.
Program scanning
Press AMS button shortly to scan preset station.
Station storing
Press PREV/NEXT button to activate automatic seek mode.
In manual mode, press PREV/NEXT button to select station. Press preset 1-6 button for 2 seconds to
store current station into the number button.