Filter
Top Products
18
APS (Auto memory store/ Preset scan) function
Preset scan: press APS button on the panel or AMS button on the RC to scan all preset
stations in the memory of the current band and stay on each memory stations for about 5
seconds. To stop preset scan, press this button again. To listen to saved station press 1-6
buttons.
Auto memory store: press APS button on the panel for more than 2 seconds to enter
auto store mode. The radio will automatically store the 6 strongest available stations to
the 6 preset memories of the current band. To stop auto store, press this button again.
Stereo/ Mono mode
Press the ST/PROG button on the RC to select Stereo or Mono.
OR press the SEL button until ST is selected, rotate the VOL knob to select Stereo or Mono.
Local/Distance control
Press the LOC/RDM button on the RC to select LOC ON or LOC OFF mode.
OR press the SEL button until LOC is selected, rotate the VOL knob to select LOC ON or LOC
OFF mode.
Local and distance reception setting can facilitate the radio reception, depending on the
location in which the radio is being used.
AF (Alternative Frequencies) function
Press the AF button on the panel to select AF ON or AF OFF.
When the radio signal strength is poor, enabling the AF function will allow the unit to
automatically search another station with the same PI (Program Identification) as the current
station but with stronger signal strength.
PS (Program Service name): the name of station will be display instead of frequency.
If RDS service is not available in your area, turn off the AF mode. Default setting is ON.