Filter
Top Products
12
Radio operations
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is
not available in you area, the following service is not available, either.
BAND selection
Press BAND button on the panel or on the RC repeatedly to select your desired radio band during RADIO
mode: FM1, FM2, FM3, AM1, AM2.
Auto/Manual tuning
- Press and hold LEFT/RIGHT buttons on the panel or PREV/NEXT buttons on the RC to choose either
manual or auto search.
- In auto tuning mode: press NEXT/PREV buttons on the RC or LEFT/RIGHT cursor buttons on the panel,
the unit will search stations automatically.
- In manual tuning mode: press NEXT/PREV buttons on the RC or LEFT/RIGHT cursor buttons on the panel
repeatedly to find the needed station.
- Use UP/DOWN cursor buttons on the panel to select the station that has already been stored.
Auto memory store
Select a band. Press APS/PLAY/PAUSE button on the panel or APS button on the RC and hold for 2 seconds
to enter auto store mode. The radio will automatically store 6 stations to the 6 preset memories of the
current band. To stop auto store, press any button except PWR.
Preset scan
Select a band. Press APS button on the RC or APS/PLAY/PAUSE button on the panel to scan all preset
stations in the memories of the current band and stay on each memory stations for about 4 seconds. To
stop preset scan, press APS button on the RC or APS/PLAY/PAUSE button on the panel again.
Programming tuner stations
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically.
To store a station:
- Select a band (if needed).
- Select a station by LEFT/RIGHT cursor buttons on the unit or PREV/NEXT buttons on the RC.