Filter
Top Products
Controls & Functions
1.Low Level OUT RCA jacks
2. Low Level Input RCA jacks
The LINE OUT allows you to build multiple amplifier systems without having to use splitter
cords to distribute the signal. Now it is simply a matter of bringing one set of RCAS into the
first amplifier, then using the line out RCA jacks as the feed to the next amplifier.
These inputs are for signal cables from the source. Always use high quality shielded RCA
cables.
Min
Max
LEVEL
3. Input Sensitivity Adjustment
This control allows you to vary the amplifier's input sensitivity between 0.5 (500 millivolts) and
10 volts. Clockwise (right-side) rotation raises the threshold and lowers the sensitivity, requiring
higher input signal voltage from the source, in order to obtain maximum output.
Counterclockwise (left-side) adjustment lowers the threshold and raises the sensitivity, requiring
a lower source voltage from the headunit. The overall objective is to set this control to some
intermediate point (0.5 - 10 volts), which closely matches the voltage produced by the headunit.
Avoid setting the threshold too low and supplying excessive input signal voltage, as this would
saturate the input stages and introduce unwanted distortion.
LINEOUT LINEIN
L
R
CONTROLS & FUNCTIONS
LINEOUT LINE IN
R
L
LINEOUT LINE IN
L
R
LINEOUT LINE IN
R
L
X3.71 X3.60
7
X3.71 X3.60