Filter
Top Products
Instruction Manual
4
IInnssttaallllaattiioonn
1. Shut down power to the host computer and monitor/display, as well as to
COMP2VGATV2.
2. Connect COMP2VGATV2 to an LCD or CRT monitor and your computer by connecting
from VGA IN (rear panel) to your display card (using the included 8 pin to 15 pin VGA
Cable), and VGA OUT to your LCD / CRT monitor.
3. Connect the 3.5mm to 3.5mm stereo cable from your sound card’s Line Out port to
the Audio IN port provided by COMP2VGATV2, then connect your speakers / headset
to COMP2VGATV2’s Audio Out port.
4. Connect your Cable TV Antenna to the antenna input provided by COMP2VGATV2.
5. Connect your Composite video and/or S-Video input ports in the front of the device.
6. Connect the DC power converter’s output to the DC IN port, located on the rear panel
of COMP2VGATV2.
Once power has been connected, COMP2VGATV2 should automatically power on, as
will be indicated by the Power LED.