Filter
Top Products
TASCAM CD-500/500B 25
NOTE
The resume function on/off setting is retained even when
the power is turned off.
Call function
During playback or when paused, press the CALL [PLAY
MODE] button on the player or the CALL button on the
remote to locate to the point when playback last started
and pause playback. However, when this function is used
with a data CD, playback pauses at the beginning of the
track that was playing when playback was last started.
Incremental play function
When the incremental play function is on, pressing the
Á PLAY button on the remote during playback will
start playback from the beginning of the next track, and
pressing the ª (stop) [INTRO CHECK] button on the
player or the ª STOP button on the remote will pause
playback at the beginning of the next track.
NOTE
•
When the incremental play function is on and playback
is paused, pressing the Á PLAY button on the remote
will start playback from that point, and pressing the
ª (stop) [INTRO CHECK] button on the player or the
ªSTOP button on the remote stops playback.
•
During playback of the last track, if you press the Á
PLAY button on the remote, playback of the first track
will start. If you press the ª (stop) [INTRO CHECK]
button on the player or the ª STOP button on the
remote, playback will pause at the beginning of the
first track.
•
Setting the CD-500B control I/O parallel connector pin
13 (PLAY) to ON has the same effect.
•
Receiving a stop command from the CD-500B control
I/O parallel connector pin 11 (FADER START/STOP) has
the same effect.
To turn the incremental play function on/off, use the
11
Inc-P
menu item (default value:
OFF
).
When the incremental play function is on,
INCR
appears
in the lower part of the display.
NOTE
The incremental play function on/off setting is retained
even when the power is turned off.
Repeat playback
You can repeatedly play back all tracks or repeatedly
play back a specified region within a track (A-B repeat
playback).
Ordinary repeat playback
When the repeat playback function is on, behavior
depends on the playback mode.
•
All track playback (ordinary playback) mode: the entire
disc is played back repeatedly
•
Single track playback mode: the current track is played
back repeatedly
•
Program playback mode: all the tracks in the program
are played back repeatedly
•
Random playback mode: all the tracks on the disc are
played back at random repeatedly
Use one of the following procedures to turn the repeat
playback function on.
Using the front panel buttons:
When in shift mode (SHIFT indicator lit), press the Á
[REPEAT] button.
REPEAT
appears of the top of the
display when repeat mode is activated.
Using the remote control:
Press the remote REPEAT button.
REPEAT
appears of
the top of the display when repeat mode is activated.
Use one of the following procedures to turn the repeat
playback function off.
•
When the player is in shift mode (SHIFT indicator lit),
press the Á [REPEAT] button again until
REPEAT
disappears from the top of the screen.
•
Press the REPEAT button on the remote until
REPEAT
disappears from the top of the screen.
NOTE
The repeat playback setting is retained even when the
power is turned off.
A-B repeat playback
You can specify a desired interval (A-B) within a track to be
played back repeatedly. Use the following procedures to
enable A-B repeat playback.
1 During playback or when paused, when the player
is in shift mode (SHIFT indicator lit), press and hold
the Á [REPEAT] button on the player or press and
hold the REPEAT button on the remote to activate
A-B repeat mode.
REPEAT
will blink at the top of
6 – Various Playback Functions