Filter
Top Products
TASCAM CD-500/500B 29
item differs slightly from the others. Use the following
procedures with this item.
1 Select the
05 FADE
menu item.
Press the PITCH [MENU] knob to enter fade in/out
setting mode. The screen appears as follows.
2 Press the PITCH [MENU] knob or the remote ENTER
button to enter fade in setting mode.
3 Turn the PITCH [MENU] knob on the player or
use the PREV and NEXT buttons on the remote
to set the fade in time. The fade in time can be
set between 0.5 and 10 seconds in 0.5-second
increments (default value:
OFF
).
4 Press the PITCH [MENU] knob on the player or the
ENTER button on the remote to confirm the fade in
setting and enter fade out setting mode.
5 Turn the PITCH [MENU] knob on the player or
use the PREV and NEXT buttons on the remote
to set the fade out time. The fade out time can
be set between 0.5 and 10 seconds in 0.5-second
increments (default value:
OFF
).
6 Press the PITCH [MENU] knob on the player or the
ENTER button on the remote to confirm the fade
out setting and exit menu mode.
The display returns to its usual appearance.
NOTE
•
FADE
appears at the bottom of the display whenever
fade in or fade out is set.
•
To set only the fade out time, in fade in/out setting
mode step 1 above, turn the PITCH [MENU] knob
on the player (or press the PREV or NEXT button on
the remote) until
OUT
blinks. Then, press the PITCH
[MENU] knob on the player (or the ENTER button on
the remote) to enter fade out setting mode.
•
To set only the fade in time, after step 4 above, press
the DISPLAY [LOCK] button on the player or the
MENU button on the remote to exit menu mode.
•
The fade in/out function settings are retained even
when the power is turned off.
Skip back playback
During playback, you can skip back by a preset amount of
time and continue playback.
During playback, press the Á (play) [REPEAT] button.
Setting the skip back time
To set the skip back time, use the
14 S-BAC
menu item.
Options: 0–60 seconds (0.5-second increments, default
value: 3 seconds)
NOTE
•
When the incremental play function is on, it receives
priority and skip back playback is disabled when you
press the Á PLAY button on the remote. Use the Á
(play) [REPEAT] button on the front panel or turn the
incremental play function off.
•
Skip back playback is only possible with audio CDs.
Skip back playback is not possible with data CDs.
•
Skip back playback settings are retained even when the
power is turned off.
Flash start function
The beginnings of up to twenty tracks can be pre-loaded
into memory, enabling their playback to be triggered
instantly
When tracks have been added to the program, the
beginnings of the first 20 tracks in the program will be
loaded into memory.
When no tracks have been added to the program, the
beginnings of the first 20 tracks on the disc will be loaded
into memory.
NOTE
•
The flash start function is only possible with audio CDs.
The flash start function is not possible with data CDs.
•
When playing back using the flash start function, the
auto-cue and auto-ready functions are disabled.
Using the front panel buttons:
1 Prepare the program as necessary.
2 When in shift mode (SHIFT indicator lit), press the 1
[FLASH] number button.
NOTE
Setting the
19 FLASH
menu item to
ON
has the same
effect (default value:
OFF
).
6 – Various Playback Functions