Filter
Top Products
10
GETTING STARTED INITIAL SET UP
Getting Started - Initial Set Up
USB
LAN
Remove the plastic tab to activate the remote control and press
the Standby button to power on the TV
Switch on the television using the power on/off switch.
On/Off Sw
Using the RF cable supplied, connect the TV to the TV Aerial wall socket
(Fig A) then connect the Power cable to the Electrical outlet (Fig B)
Fig B
Fig A
STEP 1 - Connecting the stand STEP 2 - Connecting the TV
Insert the TV into the
stand at 45 degrees.
Twist the TV into the CLOSE
position until it clicks into
place.
1B
1A
2A
2B
2C
2D
If you do not wish to connect
the TV to the internet now,
skip to 2C
You can connect the TV to the
internet using either Wifi or
Wired connection depending
on your home set up.
Wifi connection. Connect the
USB Wifi adaptor (included) to
one of the USB ports on the TV.
Wired connection. Connect
a Cat 5/Ethernet cable (not
included) from the TV to your
broadband modem/router.
a)
b)
Connecting to the Internet. (Optional)
Your broadband
router
User Guide - Technika 22-212i.indd Sec1:10User Guide - Technika 22-212i.indd Sec1:10 09-Dec-11 2:25:17 PM09-Dec-11 2:25:17 PM