Filter
Top Products
Getting Started
User’s Manual 22
Turning on the power
This section describes how to power up your tablet.
Press and hold Power button to turn on the tablet.
(Sample Illustration) Turn on the tablet
Initial Setup
The Setup Screen will be the first screen displayed when you turn on the
power. Setup your tablet according to the following steps:
1. Choose your preferred language and tap Start to continue.
2. Connect to a wireless network via Wi-Fi or 3G (The 3G option is only
supported by 3G models).
You may also skip this step and turn Wi-Fi on later in Settings screen.
3. Choose whether to use Google
Location Service
TM
and tap Next to
continue.
4. Set date and time or use network-provided time and tap Next to
continue.
Turning off the power
If you are not going to use your tablet for a long time, shut it down. You can
also turn the LCD off in order to extend battery life.
Shut down the tablet
When you shut down the tablet, no data will be saved. The tablet will boot
to the operating system's main screen the next time it is turned on.
1. If you have entered data, either save it to flash memory or to other
storage media.
2. Disconnect first if the tablet is connected to a computer.
3. Press and hold Power button for 2 seconds and select OK to turn off
the tablet.
Never turn off the power, disconnect an external storage tablet or remove
storage media during data read/write. Doing so can cause data loss.
■ In any emergency case, you can also press and hold Power button for
about six seconds to force power off.
■ Do not turn the tablet back on immediately - wait a short period to avoid
any potential damage.