Filter
Top Products
www.velodyne.com
4 - WiConnect User’s Manual
A. CHANNEL: Select broadcast frequency. This CHANNEL selection must match CHANNEL selection on
the transmitter.
B. LFE INPUT: Optional wired connection to receiver, if not using the wireless connection.
C. PHASE: Invert the phase of the subwoofer, if it blends better with the satellite speakers.
D. LOW-PASS CROSSOVER: Select the upper frequency to cut-o the audio signal to the subwoofer
output.
E. ACTIVE:
• Solid yellow when ON/ACTIVE using wireless connection.
• Flashing yellow and green when ON/ACTIVE , but no RF signal.
• Solid Red when in ON/STAND BY.
• Subwoofer goes to STAND BY if no audio signal is present for 12 minutes.
F. VOLUME: Adjust subwoofer volume.
G. POWER: Switch power ON and OFF.