Filter
Top Products
20
4.2.6. CONFIGURATION2 menu
PIP
1
2
3
SET EXIT MENU
2
:SEL :NEXT
LANGUAGE
OSD TURN OFF
OSD H POSITION
OSD V POSITION
MONITOR ID
IR CONTROL
TILING
POWER ON DELAY
CLOSED CAPTION
CONFIGURATION2 RESET
INFORMATION OSD
MONITOR INFORMATION
CONFIGURATION2
:RETURN :EXIT MENU
OFF
OFF
50
50
3 SEC.
1
45
LANGUAGE
Select the language used in the OSD menu.
The options are: {
} / { } /
{
} / { } / { } / { } /
{
} / { } / { }.
OSD TURN OFF
Set the period of time the OSD menu stays on the
screen.
The options are: {5 ~ 120} seconds.
OSD H POSITION
Adjust the horizontal position of the OSD menu.
OSD V POSITION
Adjust the vertical position of the OSD menu.
INFORMATION OSD
Set the period of time the information OSD
displayed on the upper right corner of the screen.
The information OSD will display when input signal
is changed.
The information OSD will remain on the screen
with {OFF} selection.
The options are: {OFF, 3 SEC. ~ 10 SEC.}.
MONITOR INFORMATION
Displays the information about your display,
including MODEL NAME and SERIAL.
MONITOR ID
Set the ID number for controlling the display via
the RS232C connection. Each display must have
a unique ID number when multiple sets of this
display are connected.
IR CONTROL
Select the operation mode of the remote control
unit when multiple displays are connected via the
RS232C connection.
• {NORMAL} - All displays can be operated
normally by the remote control.
• {LOCK} - Lock the remote control function
of this display. To unlock, press and hold the
[DISPLAY] button on the remote control for 5
(ve) seconds.
TILING
With this function you can create a single large-
screen matrix (video wall) that consists of up to
25 sets of this display (up to 5-set each at the
vertical and horizontal side). This function
requires a daisy-chain connection.
EXIT MENU
:SEL +-:ADJ :RETURN :EXIT MENU
TILING
H MONITORS
V MONITORS
POSITION
FRAME COMP.
ENABLE
1
1
1
OFF
OFF
Example: 2 x 2 screen matrix (4 displays)
H MONITORS = 2 displays
V MONITORS = 2 displays
1 2
3 4
H MONITORS
V MONITORS
Position
Example: 5 x 5 screen matrix (25 displays)
H MONITORS = 5 displays
V MONITORS = 5 displays
1 2
6 7
3 4
8 9
5
10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
H MONITORS
V MONITORS
Position
• H MONITORS - Select the number of displays
on the horizontal side.
• V MONITORS - Select the number of displays
on the vertical side.