Filter
Top Products
18
4.2.4. PIP menu
PIP
1
2
3
SET EXIT MENU
PIP
:SEL :NEXT
PIP MODE
PIP SIZE
PIP AUDIO
PIP H POSITION
PIP V POSITION
SUB INPUT
PIP RESET
PIP
:RETURN :EXIT MENU
SMALL
MAIN AUDIO
100
0
VIDEO
OFF
PIP MODE
Select the PIP (Picture-in-Picture) mode.
The options are: {OFF} / {PIP} / {POP} / {SBS
ASPECT} / {SBS FULL}.
PIP SIZE
Select the size of the sub picture in the PIP
(Picture-in-Picture) mode.
The options are: {SMALL} / {MIDDLE} / {LARGE}.
PIP AUDIO
Select the audio source in the PIP (Picture-in-
Picture) mode.
• {MAIN AUDIO} - Select audio from the main
picture
• {SUB AUDIO} - Select audio from the sub
picture.
PIP H POSITION
Adjust the horizontal placement of the sub picture.
PIP V POSITION
Adjust the vertical placement of the sub picture.
SUB INPUT
Select the input signal for the sub-picture.
PIP RESET
Reset all settings in the PIP menu to factory preset
values.
NOTES:
• The PIP function is available only for certain
signal source combinations as shown in the
table below.
• The availability of the PIP function will also
depend on the resolution of the input signal
being used.
Main Picture
Sub Picture
DVI VGA HDMI YPbPr Video DP
DVI X O X O O X
VGA O X O X X O
HDMI X O X O O X
YPbPr O X O X X O
Video O X O X X O
DP X O X O O X
(O: PIP function available, X: PIP function
unavailable)
By pressing the [PIP ON/OFF] button on the
remote control, you can change the mode in the
order shown below:
PIP POP
SBS ASPECT SBS FULL
OFF
The resolutions in the PIP and POP modes are
congured as follows:
PIP SIZE {SMALL} : 320 x 240 pixels
{MIDDLE} : 480 x 320 pixels
{LARGE} : 640 x 480 pixels
POP SIZE: 474 x 355 pixels
NOTE: The images displayed in the sub picture
always t the PIP sizes shown above
irrespective of the aspect ratio of the input
image.
4.2.5. CONFIGURATION1 menu
PIP
1
2
3
SET EXIT MENU
1
:SEL :NEXT
OFF TIMER
SCHEDULE
DATE AND TIME
CONFIGURATION1 RESET
CONFIGURATION1
:RETURN :EXIT MENU
OFF
OFF TIMER
Set the display to turn itself off to standby mode
within an amount of time specied.
The options are: {OFF, 1HOUR ~ 24HOURS} from
currrent time.
SCHEDULE
This function allows you to program up to 7 (seven)
different scheduled time intervals for the display to
activate.