Filter
Top Products
ENGLISH
6
ViewSonic M70/M70B
1 Connect video cable
Make sure both the M70/M70B and
computer are powered OFF. Connect
the video cable to the computer.
Macintosh
®
users:
Connect a
Macintosh adapter (part No. VMAC-1)
to the video cable, then to the M70/
M70B. To order an adapter, contact
ViewSonic
®
(see the back cover of this
guide). You will need to provide your
M70/M70B's serial number.
2 Connect power cord
Connect the power cord to a prop erly
grounded AC outlet, then to the M70/
M70B.
3 Power-ON computer and monitor
Power-ON the computer, then power-
ON the M70/M70B monitor.
NOTE: At this point Windows
®
98 users
may receive a message asking them to
install the M70/M70B's INF file.
4 Install INF and ICM files
• For CD-ROM: Insert the CD-ROM
into your system, wait for it to auto-
load, select “Monitor Drivers,” and
follow the on-screen instructions.
Quick Installation
4 Install INF and ICM files (cont.)
• For diskette: Insert the diskette into
your system, run install.exe, and
follow the on-screen instructions.
5 Audio Installation (optional)
• Speakers: Connect audio cable to
the AUDIO OUT port of your
computer's sound card, then to
the monitor's AUDIO IN port (see
illustration below).
• Microphone: Connect audio cable
to the MIC IN port of your
computer's sound card, then to
the monitor's MIC OUT port (see
illustration below).
6 Windows users: Setting the
Timing Mode (
Resolution and
Refresh Rate)
Example: 1024x768 @ 75Hz
Resolution Right-click on the
Windows desktop > Properties >
Settings > "Desktop Area." Set the
resolution.
Refresh Rate (vertical frequency)
See your graphic card's user guide
for instructions.
Getting Started
Installation is complete! Enjoy your new M70/M70B Monitor!
To be best prepared for any future customer service needs:
•
Write the serial number (see back of the monitor) in
"For your Records"
on page 1 of
this guide.
•
Register the warranty of your monitor on the Internet at: http://www.viewsonic.com
Power
cord
Video Cable
Wall
Socket
Back of
Computer
AC IN
Audio IN
(from sound card)
Microphone OUT
(to sound card)
External
Microphone IN
Headphones
IN