Filter
Top Products
17
2. Connect a USB cable to the external PC from the TOUCH OUT port of the
display.
3. Plug the power cord into the rear panel of the display and flip the power switch
(I/O) to the “I” position. The display is now in “Standby” mode.
4. Turn on your external computer and set up the touch driver.
5. Press the button on the right-hand side of the display to turn on the screen.
6. Press the INPUT button to switch to the “PC” source.
Note: For optimal results, select 1920x1080p as the external computer's input
resolution.