Vizualogic A-1285/6 Car Video System User Manual


 
3


Driver and Passenger side Vizualogic PerfectMatch Headrest with integrated
Monitor and DVD Player(s).
DVD and monitor function control via touch screen function.
A/V control module with multi-source capability.
Full function remote control. Controls monitor functions, DVD player functions,
and A/V source input selection.
Wireless dual channel infrared headphones.
Integrated wireless FM modulator.

1. A/V Control Module
2. Driver & Passenger
Monitor A/V Output -
Used to output signal to
external devices such as
aftermarket radios, wired
FM modulators, auxiliary
screen’s ect.
3. FM Transmitter Antenna - Connects to
the A/V Control Module via the terminal
marked “ANT”. Wirelessly outputs the
user-selected audio sources information
via one of seven user-selectable FM
frequencies to the vehicle radio.
4. External A/V Input - Allows the connection of an external A/V source such as a
DVD player, video game system, camcorder, etc. External A/V input is viewable by
both headrest monitors.
5. Grey System Connector
6. Driver Monitor (Monitor A) Connectors - These color-coded outputs connect to the
color-coded input terminals coming from the Driver Headrest.
7. Passenger Monitor (Monitor B) Connectors - These color-coded outputs connect to
the color-coded input terminals coming from the Passenger Headrest.
8. System Power Input Terminal - Connects to the System Power Harness.
9. White System Connector.
10. System Power Harness - Connects to the power input terminal on the white system
connector. Wires are color-coded and labeled as follows:
Yellow - +12 BATT (Constant Power)
Red - +12 ACC (Accessory Power)
Black - Ground
Green - Parking Brake
Note: Parking brake wire does not need to be connected for system to operate.