Filter
Top Products
2
Tools needed for installation
Tape measure
Cutter
Phillips screwdriver
Electric or cordless drill
1/8" drill bit (for pilot holes)
7/16" wrench
5/16" socket/nut driver
1-1/2" to 3" hole saw (cable entry hole)
Sealant compatible with roof material (check with your
vehicle manufacturer for compatibility)
Tools Needed/Specifications
System Specs for Motorized Sensar
Electronic Specifications:
Operating Voltage Nominal 12VDC - Operating range 9.5 VDC to 15.5 VDC
Current draw of electronics when Power Light is off — Nominal 500uA, 1.5mA Max.
Current draw of electronics when Power Light is on — Nominal 46mA, 70mA Max.
Current draw of electronics when Power Light is on and motor running — 3 amp Max.
Control Panel Size: 4.5 x 4.5 x
Control Panel Weight: .5 lbs.
Warning Device – .2 amps (not included)
Mount Specifications:
Height Lowered: 5-1/2"
Height Raised: 33-1/2"
Roof Space Required: 13.5 x 66" (Stowed position)
Turning Diameter: 52"
Weight of Mount: 11.25 lbs.
General Specifications:
Operating Temperature: -10 to +130F
Humidity 90% noncondensing
Shipping Weight OEM Models: 18.25 lbs.
Carton Size: 48" x 12" x 10-3/4"
Rev. 8/06