Filter
Top Products
40 41
display screen that denotes antenna
signal strength. You can also press
menu and then press to scroll to
and highlight Signal Indicator. Press
the Select button. The Satellite and
Terrestrial bars show the strength of
the signal being received. If the
signal reception is good, press and
hold menu to return to the main
display screen.
7 Ensure onyX is tuned to channel 1.
Upon power up, onyX should tune to channel 1 by default, when it’s not
yet activated. If it’s not on channel 1, refer to “Listening to Satellite
Radio” on page 55 to learn about how to tune a channel.
8 Turn on your vehicle’s stereo system. Set it to play input from the
auxiliary input source.
9 You should hear XM channel 1 through your vehicle’s stereo system. You
are now ready to activate your onyX.
10 The audio level output of the onyX
can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle.
Refer to “Set Audio Level” on page 89.
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle’s stereo system is set to the correct source, i.e., auxiliary input
source (step 8). Also be sure that the audio level is set high enough to be heard
(step 10). Refer to “Troubleshooting” on page 102 for additional help.
Signal Indicator
S
ATELLIT
E
TERRESTRIA
L
Vehicle Installation
Option 2: Cassette Adapter Installation Instructions
1 Plug the Cassette
Adapter into the
green AUDIO
connector on the
dock.
2 Insert the Cassette
Adapter into the
vehicle’s cassette
deck. You may need to
turn on your vehicle’s
stereo system in order to
do so.
3 Insert the dock into the
mount.
4 Insert your onyX into the
dock.
5 Power on your onyX by pressing the Power
button.
6 Be sure the vehicle is outside and the antenna
has a clear view of the sky. Verify that you are
receiving the XM signal. There should at least
be one bar on the lower left corner of the main
AUDIO ANT PWR FM OUT
2
3
4
5
6
7
8
9
0
direct
jump
FM
menu
1
2
3 4 5 6 7 8 9 0
direct
jump
FM
menu
1