Filter
Top Products
92 En
Remote control features
■ Clearing a learned function
You can clear the function learned for a certain button in
each control area.
1 Set the operation mode selector to
F
AMP or
F
SOURCE and then press an input selector
button (
5
) to select the control area
containing the function you want to clear.
The selected component name appears in the display
window (
6
).
2 Press
C
LEARN using a ballpoint pen or
similar object.
“LEARN” and the selected component name
(e.g. “DVD”) appear alternately in the display
window (
6
).
• Do not press and hold
C
LEARN. If you hold it down for
more than 3 seconds, the remote control enters the remote
control code setting mode.
• If you do not complete each of the following steps within
30 seconds, the learning mode will be automatically
canceled. In this case, start over from step 2.
3 Press and hold
C
CLEAR using a ballpoint
pen or similar object and then press the
button you want to clear for about 3 seconds.
“C;OK” appears in the display window (
6
) if
clearing was successful. Once “C;OK” appears in the
display window (
6
) on the remote control, release
the ballpoint pen or similar object used to press
C
CLEAR to exit the clearing mode. The remote
control returns to the learning mode.
y
• If you continuously want to clear another function, repeat
step 3.
• If you continuously want to clear another function for
another component, press
6
SELECT k / n to select the
control area, then repeat step 3.
• Once you clear a learned function, the button reverts to the
factory setting (or to the manufacturer setting if you have
set remote control codes).
4 Press
C
LEARN again to exit.
• “C;NG” appears in the display window (
6
) on the remote
control if clearing was unsuccessful. In this case, start over from
step 2.
• “ERROR” appears in the display window (
6
) on the remote
control if you press more than one button simultaneously.
Notes
V
-
AUX/DOCK
DVD
VCR
DVR
PHONO
DTV/CBL
CD
MD/CD-R
TUNER
CBA
TV
SOURCE
AMP
TV
SOURCE
AMP
or
LEARN
Notes
CLEAR
LEARN
RENAME
MODE- PTY SEEK-START
01EN_00_DSP-AX763_B.book Page 92 Thursday, January 31, 2008 9:41 AM