Filter
Top Products
EQUALIZER AND X-BASS
SPECIFICATIONS
Equalizer and X-BASS
Specifications
X-BASS
Amplifier
The X-BASS feature can be used to
Output power:
boost the bass at low volume levels.
Las Vegas CD32:
4 x 22 watts sine
To activate X-BASS,
D keep the
EWX-BASS
button @
pressed until “XBASS ON” appears
in the display.
“X-BASS” appears in the display.
To deactivate X-BASS,
0
keep the
EWX-BASS
button @
pressed until “XBASS OFF”
aooears in the displav.
San Diego CD32:
in accordance
with DIN 45 324
at 14.4 V 4 x 50
watts max. power
4 x 15 watts sine
in accordance
9~ I
. _
“X-BASS” disappears.
with DIN 45 324
at 14.4V4x40
watts max. power
Santa Fe CD32:
4 x 18 watts
Sine
in accordance
with DIN 45 324
Selectinn preset sound
effect
at 14.4V4x45
You can select preset sound effect for
watts max. power
the following styles of music:
Tuner
0 CLASSIC
Frequency ranges US:
l
POPM
l
ROCKM
FM:
AM:
87.5 - 107.9 MHz
530 - 1710 kHz
The settings for these music styles have FM mono sensitivity:
already been programmed.
15dBf
To select one of the sound presets,
0 keep pressing the
ECU%BASS
FM frequency response:
button @ until the required setting
35 - 16,000 Hz
appears in the display.
CD
If
you
want to deactivate the sound pre-
Frequency response:
set,
20 - 20,000 Hz
0 keep pressing the
EQIX-BASS
button @ until “DSP OFF” appears
Pre-Amr> Out
in the display.
(not applicable to San Diego CD32)
output:
1.5 Vrms+ 2.5 dB
Subject to changes!
18
0 BLAUPUNKT