Filter
Top Products
8-48
1
2
3
4
5
6
7
8
9
10
11
3. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
4. Install the bulb holder (together with the bulb)
by turning it clockwise.
EBU25650
Removing a wheel
1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
EBU25690
Installing a wheel
1. Install the wheel and the nuts.
NOTE:
Tapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.
1. Tail/brake light bulb
2. Tail/brake light bulb holder
1
2
1. Wheel nut
1
1