Filter
Top Products
8-17
1
2
3
4
5
6
7
8
9
10
11
6. Wash the sponge material gently but thor-
oughly in solvent.
EWB01900
7. Squeeze the excess solvent out of the sponge
material and let it dry.
CAUTION:
ECB00440
Do not twist the sponge material when squeez-
ing it.
8. Check the sponge material and replace it if
damaged.
9. Apply Yamaha foam air filter oil or other qual-
ity foam air filter oil to the sponge material.
NOTE:
The sponge material should be wet but not drip-
ping.
10. Pull the sponge material over the air filter ele-
ment frame.
11. Install the washer and bolt.
CAUTION:
ECB00450
Be sure to install the washer with the bent edge
facing upward as shown.
1. Bolt
2. Washer
3. Sponge material
4. Air filter element frame
WARNING
POTENTIAL HAZARD
Using low-flash-point solvents or gasoline to
clean the sponge material.
WHAT CAN HAPPEN
Low-flash-point solvents or gasoline can
catch fire or explode.
3
4
21
HOW TO AVOID THE HAZARD
Use parts cleaning solvent to clean the
sponge material.