Filter
Top Products
4
Specifications
Power Requirements
120V: 117V-120V AC 60 Hz 2.5A
230V: 230VAC 50 Hz 1.3A
Power Amplifier Power (internal): 700 Watts
Frequency response: 45 Hz to 125 Hz
Input Impedance: 80 kOhms
Speaker components: 2 x 10 inches
Input Connections
Tip: Positive (+ve)
Ring(Shaft): Negative (-ve)
Grounding
The sleeves of the input are not grounded except when the input ground switch is
set to GND. Grounding is done through a 100-Ohm protection device in order to
prevent damage due to miswiring.
Limiting
Clipping, excursion and average voice coil current, thermal
Maximum SPL
131 dB (60 Hz to 110 Hz)
Weight
93 lb. (42 kg)
Dimensions
(WxDxH): 24" x 24.5" x 17.5"
61 cm x 62.1 cm x 44.5 cm
Note: The ES700P built-in stand mounting adapter can be used with Yorkville SW-Teletube accessory to support
our E160 cabinets. The support tube can be adjusted up to it’s full 5-foot 4-inch extension safely as long as the
ES700P is not inclined mor than 10° (10-degrees).
WARNING: Larger or heavier cabinets shound not be used!
ES700P
Yorkville