Filter
Top Products
B
FUSE F1
XFRM
5 WATT
SEE LAYOUT DIAGRAM
3. #5858 Apply a ring of RTV
on cap's sleeve as shown
2. LEADS FOR 5 WATT RESISTORS MUST BE BENT ON THE MACHINE
CH1255 CH1255E CH1255 CH1255E
**************IMPORTANT******************
5. FIT #8921 FLAT WASHER BETWEEN #3501 BELL WASHER AND #8667 SHOULDER
WASHER FOR Q2, Q10 U30 AND U31
*NOTE: IF THE NX520P MODEL IS BEING USED AS A
REFERENCE, NOTE THAT THE HORN OF THE EF500P
IS WIRED OPPOSITE TO THAT OF THE NX520P.
8. M1159, PARTS REFERENCE TABLE
#2415 #2482 #2465 #2479
F 5A F3.15A F 7A F 5A
1. ADD AMPLE RTV UNDER ENTIRE BASE OF OUTPUT COIL L1
LEAD LOOP MUST NOT BE ABOVE TOP OF RESISTOR
7
. PC7398, ADD CROWBAR CIRCUIT AND CHANGE
THE FUSE VALUE AT THE SAME TIME.
6. NOTE: COMPONENTS R183, C114, C117, R212, R213, R215, C30, C19
AND C23 ARE ALL DNS (DO NOT STUFF). THEY ARE FIXED
SO THAT THEY WILL NOT GET FORCE UPDATED.
4
. Q11 ONLY: Mount #8871 4-40
screw with head on bottom.
#8793 nut and 3501 washer on top
M1159 PRODUCTION NOTES
WITHOUT CROWBAR WITH CROWBAR
N.A. CE N.A. CE
M1159B
C77 #5282, 10U 16V 20% NP
C81 #5212, 100N 63V 5%
C89 #5631, 22U 50V 20% NP
R127 #6104, 2K2 1/4W 5% MINI
R128 #6122, 33K 1/4W 5% MINI
R145 #4982, 4K7 1/4W 5% MINI
R152 #4839, 150K 1/4W 5%
R157 #4940, 10K 1/4W 5%
R216 #4599, 22AWG SOLID JUMPER
R224 #4980, 470R 1/4W 5%MINI
D34 #6825, 1N4148 75V 0A45
D43 #6825, 1N4148 75V 0A45
U23 #6858 OPTO-COUPLER
U15 #6858 OPTO-COUPLER
_X64 #4599, 22AWG SOLID JUMPER
W28 X - NO PART
W5 X - NO PART