Managing the Video Dial Feature 163
To view the video call routing table, follow these steps:
1 From the Configuration Management menu, select [4] Manage Video Dial to
display the Manage Video Dial menu, shown earlier in Figure 129.
2 From the Manage Video Dial menu, select [1] Display Video Call Routing Table to
display the Video Call Routing Table, shown in Figure 132.
Each row in the video call routing table corresponds to a video-associated virtual
circuit (call) between PathBuilder S330/S310 CBR modules. The table provides the
following information for each entry:
Index—A unique number identifying this entry in the call routing table.
Dest Phone #—The destination phone number associated with this call.
Tx VPI/VCI—The trunk transmission VPI/VCI associated with this call.
Rx VPI/VCI—The trunk receiving VPI/VCI associated with this call.
Speed—The speed of the call, in kbps.
Status—The status of the call: idle or active.
Figure 132 Video Call Routing Table
