1-6
To do… Use the command… Remarks
Configure the number of
probes per test
count times
Optional
By default, each test makes
one probe.
Configure the packet size
datasize size
Optional
By default, the packet size is 56
bytes.
Configure the maximum
number of history records that
can be saved
history-records number
Optional
By default, the maximum
number is 50.
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Configure the probe timeout
time
timeout time
Optional
By default, a probe times out in
three seconds.
Configure the type of service
(ToS)
tos value
Optional
By default, the service type is
zero.
Start the test
test-enable
Required
Display test results
display hwping results
[ admin-name operation-tag ]
Required
Available in any view.
For ICMP tests, if no IP address is configured for the specified source interface, the ICMP test will fail; if
a source IP address has been configured with the source-ip command, the source-interface
command cannot change the configured IP address.
2) Configuring DHCP test on HWPing client
Follow these steps to configure DHCP test on HWPing client:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the HWPing client
function
hwping-agent enable
Required
By default, the HWPing client
function is disabled.
Create a HWPing test group
and enter its view
hwping administrator-name
operation-tag
Required
By default, no test group is
configured.
