KH1508Ai / KH1516Ai User Manual
182
Supported Devices
The following table represents a list of supported devices that can be used on a
KH1508
Ai / KH1516Ai installation.
Note: To connect the KH1508Ai / KH1516Ai to a Power Over the NET™ unit,
first use Cat 5e cable to connect the KH1508
Ai / KH1516Ai’s PON port
to an SN0142 adapter; then, connect the adapter to the PON In port on
the Power Over the NET™ unit.
OSD Factory Default Settings
The factory default settings are as follows:
Type
Daisy Chain Switches KH1508A; KH1516A; ACS1208A; ACS1216A;
CS1708A; CS1716A
PON PN0108
Central Control CC2000
Setting Default
OSD Hotkey [Scroll Lock] [Scroll Lock]
Port ID Display Port Number + Name
Port ID Display Duration 5 Seconds
Scan / Skip Mode All
Scan Duration 10 Seconds
Screen Blanker 0 Minutes (disabled)
Beeper On
Accessible Ports F (Full) For all Users on all Ports
