Chapter 7. Windows Client Port Operation
85
Hotkey Setup
Various actions related to manipulating the remote server can be
accomplished with hotkeys. The Hotkey Setup utility (accessed by
clicking the Keyboard icon on the Control Panel), lets you configure which
hotkeys perform the actions. The actions are listed in the left panel; the hotkeys
that invoke them are shown in the panel at the right.
If you find the default Hotkey combinations inconvenient, you can re-
configure them as follows:
1. Highlight the Action, and then Click Start.
2. Key in the Function keys (one at a time). The key names appear in the Key
field as you press them.
3. When you have finished keying in your sequence, Click Stop.
4. Click Set. Repeat for any other actions for which you wish to re-assign
Hotkeys.
5. Click Close.
Note: You can use the same function keys for more than one action, as long
as the first key is not the same. For example, you can use F1 F2 F3 for
one action; F2 F1 F3 for another; F3 F2 F1 for a third, etc.
(Continues on next page.)
kh15816i.book Page 85 Wednesday, December 26, 2007 11:12 AM
