11
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
RADIO MODE
Starting SCAN
➮ Press the OK button ; for longer
than two seconds.
Scanning begins. “SCAN” appears
briefly in the display followed by the
current frequency (which flashes).
Stopping SCAN and continuing
listening to the station
➮ Press the OK button ;.
Scanning stops allowing you to contin-
ue listening to the set station.
Setting the scantime
➮ Press the MENU button 8.
➮ Keep pressing the button :
until “SCANTIME” appears in the
display.
➮ Set the required scantime using
the
and buttons :.
➮ When you have finished making
your changes, press the MENU
button 8 or OK ;.
Note:
The set scantime also applies to scan-
ning operations in cassette mode and
CD changer mode.
Optimizing radio reception
Treble reduction feature during
interference (HICUT)
The HICUT function improves the sound
during poor radio reception. If interfer-
ence occurs, the treble and interference
level are automatically reduced.
Switching HICUT on/off
➮ Press the MENU button 8.
➮ Keep pressing the button :
until “HICUT” appears in the
display.
➮ Press the or button : to
switch HICUT on/off.
“HICUT 0” means that the treble and
interference level will not be automati-
cally reduced; “HICUT 1” means that
they will be automatically reduced.
➮ When you have finished making
your changes, press the MENU
button 8 or OK ;.
Tuner configuration
This unit is equipped with a multiband
tuner. This means that the tuner can be
configured to suit requirements that are
specific to various countries. The coun-
tries/regions available are: USA, Eu-
rope, Asia and Thailand. The tuner will
only function optimally if it is configured
for the country/region in which the unit
is being operated.
Configuring the tuner
➮ Press the MENU button 8.
➮ Keep pressing the button :
until “FM TUNER” appears in the
display.
➮ Press the or button : to set
the country/region.
➮ When you have finished making
your changes, press the MENU
button 8 or OK ;.
