13
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
“CAS SCAN” appears in the display. All
the tracks on the cassette are briefly
played in ascending order.
➮ To stop scanning, press the OK
button ; again.
The current track will then continue to
be played.
Note:
● You can set the scanning time.
For further details, read the section
on „Setting the scantime“ in the
chapter entitled “Radio mode”.
● In order for the S-CPS, RPT and
SCAN functions to work properly,
there must be a pause of at least
three seconds between each track
on the cassette.
Changing the display
To switch between the playback direc-
tion and clock displays, press the
(DIS) button 7 once or several times.
Fast tape winding
Fast forward
➮ Press the button :.
“FORWARD” appears in the display.
Fast rewind
➮ Press the button :.
“REWIND” appears in the display.
Stopping tape winding
➮ Press one of the buttons : or
the OK button ;.
Cassette playback will then be contin-
ued.
Note:
Whilst the tape is fast winding, you can
listen to the radio station that was tuned
into last. To use this feature, you must
first activate “radiomonitor”.
Pausing playback (PAUSE)
➮ To pause cassette playback, press
button 3 >.
Playback is paused and “CAS PAUSE”
appears in the display.
➮ Press button 3 > again to
cancel pause.
Switching radiomonitor on/off
➮ Press the MENU button 8.
➮ Keep pressing the button :
until “RM ON” or “RM OFF”
appears in the display.
➮ Press the or button : to
switch radiomonitor on/off.
➮ When you have finished making
your changes, press the MENU
button 8 or OK ;.
Skipping blank spaces
(blankskip)
You can automatically skip blank spac-
es on the tape that are longer than five
seconds. To do so, you must first acti-
vate the “blankskip” feature.
Switching blankskip on/off
➮ Press the MENU button 8.
➮ Keep pressing the button :
until “BLANKSKIP” appears in the
display.
CASSETTE MODE
