40
RADIO MODE
Switching PTY on/off
➮ Press the MENU button 8.
➮ Keep pressing the button : un-
til “PTY ON” or “PTY OFF” appears
in the display.
➮ Press the
or
button : to
switch PTY ON or OFF.
When PTY is switched on, PTY appears
in the display.
➮ Press the MENU 8 or OK button
;.
Selecting a programme type and
starting a search
➮ Press the
or
button :.
The current programme type appears
in the display.
➮ If you want to select another pro-
gramme type, you can do so by
pressing the
or
button :
whilst in this display.
Or
➮ Press one of the buttons 1 - 6 >
to select a programme type that is
stored on one of these buttons.
The selected programme type is dis-
played briefly.
➮ Press the or button : to start
the search.
The next station corresponding to your
selected programme type will then be
tuned into.
Note:
If no station is found that corresponds
to the selected programme type, you will
hear a beep sound and “NO PTY” ap-
pears briefly in the display. The station
that was listened to last will then auto-
matically be tuned into again.
Storing a programme type on a
station button
➮ Select a programme type using the
or
button :.
➮ Keep the required station button 1 -
6 > pressed for longer than two
seconds.
The programme type is now stored on
the station button 1 - 6 > that you se-
lected.
