55
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Configuring the level
display
The level display temporarily provides
you with a symbolic representation of
the volume and audio settings whilst
you are adjusting them.
When you are not changing any set-
tings, the level display depicts the peak
music/speech output. You can switch
the level display on/off.
➮ Press the MENU button 7.
“MENU” appears in the display.
➮ Press the or button 8 re-
peatedly until “PEAK LVL” ap-
pears in the display.
➮ Press the or button 8 to
switch between “PEAK ON” and
“PEAK OFF”.
When you have finished adjusting the
setting,
➮ press the MENU button 7 twice.
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. Audio
sources can, for example, be portable
CD players, MiniDisc players or MP3
players.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable (Blau-
punkt no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
Note:
● If no CD changer is connected,
the AUX input must be activated in
the menu.
Switching the AUX input on/off
➮ Press the MENU button 7.
“MENU” appears in the display.
➮ Press the or button 8 re-
peatedly until “AUX OFF” or “AUX
ON” appears in the display.
➮ Press the or button 8 to
switch AUX on/off.
When you have finished adjusting the
setting,
➮ press the MENU button 7.
Note:
● If the AUX input is activated, you
can select it by pressing the SRC
button =. “AUX INPUT” then
appears in the display.
LEVEL DISPLAY
EXTERNAL AUDIO SOURCES
02CalgMP36_gb 08.02.2006, 9:38 Uhr55
