2. The driver side cargo cover panel latch must lock
in place before the passenger side latch can be
locked. If this procedure is not followed exactly,
the cargo cover panels might not correctly lock in
place. Push the driver side latch toward the front
of the vehicle to lock the cover in position. A click
sounds when each latch locks. Lock the remaining
passenger side latch on panel 1.
3. Install cargo cover2 followed by 3 next. Place the
latches in the unlocked position. Place the cargo
cover panel on the cargo area rails while holding
the back of the cargo panel up.
Driver Side Shown, Passenger Side Similar
Push the panel forward until it is snug against the
other panel and then let the back of the panel
down making sure that the pegs (A) align with the
receivers (B).
3-69
