Cadillac 2010 Escalade EXT Manual

A SERVICE OF

next previous

3. Assemble the two jack handle extensions (I) and

wheel wrench (H) as shown.

4. Insert the open end of

the extension (F)

through the hole in the

rear bumper (G) (hoist

shaft access hole).

5. Raise the tire part way upward. Make sure the

retainer is fully seated across the underside of the

wheel and is centered in the wheel opening.

6. Raise the tire fully against the underside of the

vehicle by turning the wheel wrench clockwise until

you hear two clicks or feel it skip twice. You cannot

overtighten the cable.

7-94