2
Instruction Manual PSB-1401
IMPORTANT WARNINGS and CAUTIONS!
WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-
sponding instructions.
• WARNING: Improper installation can result in serious personal injury! Make sure that the mounting surface struc-
tural members can support a redundant weight factor five times the total weight of the equipment: if
not, reinforce the mounting surface structural members before installing the mount.
• WARNING: Failure to use proper attaching hardware and installation procedures may result in equipment damage
or serious personal injury.
• WARNING: Be aware of the potential for personal injury or damage to the unit if it is not adequately mounted.
• WARNING: The installer is responsible for verifying that the mounting surface structural members to which the
mount is anchored will safely support the combined load of all attached components or other equip-
ment.
• WARNING: The combined weight of the display panel must not exceed 150 lbs. (68.04 kg), the maximum load capac-
ity of the mount.
• CAUTION: Check the unit for shipping damage before you begin the installation.
• CAUTION: Overtightening mounting screws may damage your Large Flat Panel display.
TOOLS REQUIRED FOR INSTALLATION
• Phillips screwdrivers, No. 1 and No. 2
• 3/8” Wrench
• Allen wrench set
NOTE: Other tools may be required depending on the method of installation.
