A SERVICE OF

logo

PSMH2682 Installation Instructions
6
Figure 3
9
(C) x 2
(A) x 2
(F) x 32
(B) x 2
9. Attach two outside vertical brackets (A) and two inside
vertical brackets (B) to two horizontal brackets (B) using
thirty-two 5/16-18" nylon lock nuts (F). The outside vertical
brackets installed must be attached as the outer two
brackets. (See Figure 3)
Display Installation
WARNING: IMPROPER INSTALLATION CAN LEAD TO
MOUNT FALLING CAUSING SERIOUS PERSONAL
INJURY OR DAMAGE TO EQUIPMENT! DO NOT substitute
hardware.
1. Move locking flags on mount to the OPEN position.
(See Figure 4)
Figure 4
OPEN
1