12D-Link DAP-2690 User Manual
Section 2 - Installation
Method 2
1. Connect one end of an Ethernet cable into the Data In port on
the PoE base unit and the other end into one port on your switch,
router, or computer.
2. Connect one end of an Ethernet cable into the P+Data Out port
on the PoE base unit and the other end into the LAN (PoE) port
on the DAP-2690 access point.
3. Use the supplied power adapter. Connect the power adapter to
the Power In receptor on the PoE adapter.
4. Connect the power cable to the power adapter and then connect
the other end into a power outlet.
Method 3
1. Connect one end of your Ethernet cable into the LAN (PoE) port
on the DAP-2690 and then connect the other end to a switch,
router, or computer.
2. Use the supplied power adapter. Connect the power adapter to
the Power receptor on the DAP-2690 access point.
3. Connect the power cable to the power adapter and then connect
the other end into a power outlet.
