A SERVICE OF

logo

Open as PDF
next previous
39D-Link DAP-2690 User Manual
Section 3 - Configuration
AP Array
Check this box to enable the AP array function. The three
modes that are available are Master, Backup Master,
and Slave. APs in the same array will use the same
configuration. The configuration will sync the Master AP
to the Slave AP and the Backup Master AP when a Slave
AP and a Backup Master AP join the AP array
Enable AP Array:
The AP Array window allows users to create a set of devices on a network that are organized into a single group in order to increase ease
of management. Once a user has made the desired settings, click the Save button to let the changes take effect.
Enter a name for the AP array you have created.
Enter a password that will be used to access the AP ar-
ray you have created.
AP Array Name:
AP Array
Password:
Click the button to initiate a scan of all the available APs
on the network.
This displays the status of the current AP array.
Scan AP Array List:
Connection Status: