ADSL Router User Manual
IP Routing – Stat
The table shows all static route status a
A static IP routing is a manually defin
route. If your local network is compo
ic Route
nd allows you to add or remove static routes.
ed path, which determines the data transmitting
sed of multiple subnets, you may want to
e.
way, WAN Interface:
sk, gateway,
mitting data will pass through.
specify a routing path to the routing tabl
Destination Network Address:
Display the IP address that the data
packets are to be sent.
Netmask, Gate
Display the subnet ma
and WAN interface information that
the trans
Delete:
Allow you to remove selected route
settings.
This page shows all the
routing table of data
packets going through your
ADSL Router.
d. Type the destination network address,
ved from the ISP and click Apply.
WAN interface. Choose one
from the drop-down menu.
Adding a New One
To add a static route, please click Ad
subnet mask and gateway that you recei
IP Address:
The destination IP address and
netmask of the network indicates
where data packets are to be sent.
You may specify an IP, type 0.0.0.0, or
leave it blank.
Gateway IP Address:
Click this button to forward packets to
the specific gateway. Key in the
gateway IP address that you want to
use.
WAN Interface:
Click this button to forward packets to
a specific
For example, type
192.168.1.1 in the field of the
gateway IP address and
leave the destination network
blank. Click Apply to view
the routing result.
emove Static Route
If you don’t want the static route that
you created, please click the
R
icon in
the Delete column from the table.
A dialog window will appear to confirm
your action. Click OK to remove the
static route, or click Cancel to keep
the setting.
90
