126
EMC Host Connectivity with QLogic FC and iSCSI HBAs and FCoE CNAs for the Linux Environment
Installing and Configuring the Linux Host with the QLogic Driver
ProdID = LUNZ
ProdRv = 0218
LunSize = 17179869184.000 GB
#***************************************************#
# INSTALLATION SUCCESSFUL!! #
# SANsurfer Driver installation for Linux completed #
#***************************************************#
An example of the modified /etc/modprobe.conf file is as follows:
[root@l82bi114 root]# more /etc/modules.conf
alias eth0 e1000
alias eth1 e100
alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptscsih
alias scsi_hostadapter2 qla4xxx
alias usb-controller usb-uhci
On SLES 9 hosts, the /etc/sysconfig/kernel file is also
modified.
The following is an example of a modified /etc/sysconfig/kernel file:
INITRD_MODULES="cdrom scsi_mod ide-cd aic79xx qla4xxx reiserfs"
As specified in the driver installation output, a new ramdisk is
created automatically by the QLogic installation script.
If additional changes to the
/etc/modprobe.conf file are
required, create a new ramdisk manually:
For Red Hat, use:
cd /boot
mkinitrd initrd-$1.img $1
where $1 is the currently running v2.6.x kernel version.
Example:
cd /boot
mkinitrd initrd-2.6.9-22.ELsmp.img
2.6.9-22.ELsmp
For SuSE, use:
cd /boot
mkinitrd -i initrd-$1 -k vmlinuz-$1
where $1 is the currently running v2.6.x kernel version.
