5
HARDWARE DESCRIPTION:
INSTALLATION:
1. Turn on your computer.
2. Plug the USB connector of your Webcam into an available USB 2.0 port on your computer.
(NOTE: The webcam driver can not be installed if the webcam is not connected to your
computer.)
3. Insert the enclosed Software CD into the CD-ROM drive of your computer.
4. The Webcam Driver will start automatically. If it does not start automatically, please click
“Start”, then “Run…”, type “D:\Setup.exe” into the dialog box. (NOTE: “D:\” represents the
drive letter assigned to the CD-ROM drive you are using. If D is not the letter assigned to
your CD-ROM drive, please replace D with the appropriate drive letter). Then click “OK”.
5. The “USB Webcam – InstallShield Wizard” will appear on the desktop.
6. Select your preferred language.
7. Follow the on-screen instructions to finish the installation. Please restart your computer after
the installation is finished.
8. You will find the “WEBCAM Driver” icon on your desktop.
9. Your webcam is now ready to be used.
NOTE: For Windows
®
Vista and 7 users, please run the Camera Application software as
administrator for the first time.
Lens
Built-in
Microphone
Snapshot
Button
LED Brightness
Adjust Switch
