7
Important security advices
Operation Safety
The housing of the QURE has the standard 19"-EIA format and
occupies 2U (88.9 mm) in your rack. When installing the unit in a
19"-rack, the rear side of the unit needs some support, especially
in a touring case.
Choose the installation location of your unit carefully:
The Q
URE should not be installed near units which produce
strong magnetic fields or extreme heat. Avoid placing it in direct
sunlight.
Also avoid locations subject to vibration and excessive dust,
heat,cold,or moisture.
Keep it away from sources of hum such as transformers or
motors.
Do not install the Q
URE directly above or below power ampli-
fiers.
Check that the voltage details quoted on the back panel are the
same as your local mains electricity supply. Use a minus (-)
screwdriver to set the voltage selector to the voltage for the area
in which the unit will be used.
Never cover up the ventilation slots on the top of the unit. If,
during operation,the sound is interrupted or indicators no longer
illuminate, or if abnormal odor or smoke is detected, or if liquids
are spilled on the unit, immediately disconnect the power cord
plug and contact your dealer.
WARNING: Do not open the cabinet of this unit, because to do
so might result in damage to the unit,or injury by electric shock. If
any foreign object or substance enters the unit, contact your
dealer for assistance.To reduce the risk of electric shock, do not
expose this appliance to rain or moisture.
To prevent damage by lightning, disconnect the power cord
from the household AC outlet during an electrical storm. When
disconnecting the power cord from the household AC outlet,
grasp the plug; do not pull the cord. Refer servicing to qualified
personnel only!
Do not apply excessive force when using switches and controls.
When moving the unit, be sure to first disconnect the power cord
from the household AC outlet, and disconnect cords connected
to other equipment.
Do not attempt to clean the unit with chemical solvent as this
might damage the finish. Only clean the Q
URE with a clean, soft,
lint-free cloth.
