A SERVICE OF

logo

6
…1 DISPLAYS AND FUNCTION KEYS
Display Error/Action
Calibration error
Turn power off and on again (if the
error persists, contact the
Supplier).
Configuration error
The configuration and/or setup
data for the instrument is
corrupted. Turn power off and on
again (if error persists, check
configuration/setup settings).
A to D Converter Fault
The analog to digital converter is
not communicating correctly.
Process Variable Over/Under
Range
Option board error
Communications to the option
board have failed.
To Clear Display
Press the
key
Press the
key
Turn power off and
on again. If error
persists, contact the
Supplier
Restore valid
input
Contact the Supplier
1.4 Error Messages
9999
CAL.Err
CFG.Err
A.d. Err
DPt.Err