C H A P T E R 11 Enterprise Standby Router Protocol (ESRP)
187
Then, set the priority of environmental failover using the command:
configure vlan <vlan name> add track-environment
failover <priority>
Disable the priority of environmental failover, using this command:
configure vlan <vlan name> delete track-environment
failover <priority>
To enable the priority of the diagnostic failover, use this command:
configure vlan <vlan name> add track-diagnostic
failover <priority>
To disable the priority of the diagnostic failover, use this command:
configure vlan <vlan name> delete track-diagnostic
Typically, you set the failover priority lower than the configured
priority. Thus, if one of the VLANs experiences a hardware or
diagnostics failure, that VLAN becomes the standby VLAN.
