386
Intel
®
NetStructure™ 480T Routing Switch User Guide
create slb pool testpool1
configure slb pool testpool1 add 1.205.1.1:80
configure slb pool testpool1 add 1.205.1.2:80
create slb vip site1 pool testpool1 mode
transparent 1.10.1.1:80
create slb vip site2 pool testpool1 mode
transparent 1.10.1.2:80
configure enable slb
configure vlan inside slb-type client
configure vlan server slb-type server
configure slb failover unit 1 remote 1.10.0.3
local 1.10.0.2:1028
enable slb failover
enable slb failover ping
configure slb vip site1 unit 1
configure slb vip site2 unit 2
configure slb fail ping-check 1.10.0.1 freq 1
To configure this example on the second switch, use these
commands:
create vlan inside
create vlan server
configure vlan inside ipaddress 1.10.0.3 /16
configure vlan inside add port 10
configure vlan server ipaddress 1.206.0.1 /16
configure vlan server add port 4-8
enable ipforwarding
create slb pool testpool2
configure slb pool testpool2 add 1.206.1.1:80
configure slb pool testpool2 add 1.206.1.2:80
create slb vip site1 pool testpool2 mode
transparent 1.10.1.1:80
create slb vip site2 pool testpool2 mode
transparent 1.10.1.2:80
enable slb
configure vlan inside slb-type client
configure vlan server slb-type server
configure slb failover unit 2 remote 1.10.0.2
local 1.10.0.3:1028
