RD-VH7/X-VH7 (EN)
Recording onto cassette tape
45
4.
Set the recording condition.
5.
Start recording.
1Press the “¶ rec/arm” key.
2Play (or tune) the input
source to be recorded.
÷ The recording level is adjusted auto-
matically when the “crls” function
is used. y
÷ Recording stops automatically when
the tape side(s) to be recorded have
been fully recorded.
Temporary stop during recording An unrecorded portion of about 4 seconds is
produced
(auto recording mute)
1Press the “7 stop” key to set the cassette
deck in stop mode.
2Press the “¶ rec/arm” key twice.
÷ Press the “¶ rec/arm” to restart recording.
To end recording
Lights
To enter record-pause mode from record mode
after leaving a non-recorded blank of about 4
seconds
rec
/arm
55
pause
pause
Dolby NR
rev.mode
1Select the reverse mode.
2Select the Dolby NR mode.
“”” lit ..... Tape stops after having recorded the two sides.
Goes off..... Tape stops after having recorded one side of
tape.
“B-type” ... Tape is recorded using B Type.
“C-type” ... Tape is recorded using C Type.
Goes off..... Dolby NR is deactivated.
Each press switch the modes as
follows.
44
function indicator
Dolby NR
B-type
rev.mode
crls
pause
C-type
reverse
forward
direction
rev.mode
Dolby NR
B-type
C-type
Lights
Lights
stop
Lights
recording
rec
/arm
Lights
pause
Blinks for 4 sec.
then lights steadily.
rec
/arm
Lights
pause
Blinks for 4 sec.
then lights steadily.
Cassette deck only
Cassette deck
Cassette deck only
Cassette deck only
To enter record-pause mode from stop mode
after leaving a non-recorded blank of about 4
seconds
CASSETTE DECK OPERATIONS
Press twice.
Press the “¶ rec/arm” key during recording.
Lights
